Conference Publications


  1. G. Niu, F. Shang, M. Krishnamurthy, “Hydraulic Accumulator Sizing in Novel Electric-Hydraulic Hybrid (EH2) Energy Storage Systems in EVs”, 2016 IEEE Transportation Electrification Conference and Expo, Dearborn, MI, June 27-29, 2016.

  2. A. Pozo Arribas, M. Krishnamurthy, “SiC BJT Proportional Base Driver with Collector-Emitter Voltage Measurement and a Switching Regulator”, 2016 IEEE Transportation Electrification Conference and Expo, Dearborn, MI, June 27-29, 2016.

  3. M. Krishnamurthy, G. Niu, “Teaching Science Through Technology: An Approach to Enhance Understanding Using Emerging Applications in Electrified Transportation”, 2016 Envisioning the Future of Undergraduate STEM Education (EnFUSE): Research and Practice (sponsored by Advancement of Science (AAAS) and the National Science Foundation’s Division of Undergraduate Education), Washington, DC, April 27-29, 2016.

  4. F. Shang, M. Krishnamurthy, A. Isurin, “A Novel High Gain Step-Up Resonant DC-DC Converter for Automotive Application”, 2016 IEEE Applied Power Electronics Conference (APEC), Long Beach, CA, March 15-18, 2016.

  5. M. Salameh, B. Schweitzer, P. Sveum, S. Al-Hallaj, M. Krishnamurthy, “Online Temperature Estimation for Phase Change Composite – 18650 Lithium Ion Cells Based Battery Pack”, 2016 IEEE Applied Power Electronics Conference (APEC), Long Beach, CA, March 15-18, 2016.

  6. S. DeDios-Stern, M. Ivins-Lukes, E.-J. Lee, M. Krishnamurthy. “Investigating wheelchair users’ experiences for the development of new wheelchair technology: A pilot study”, 2015 APA Annual Convention, Toronto, Canada, August 6-9, 2015.

  7. G. Niu, M. Salameh, A. Pozo Arribas, M. Krishnamurthy, J. Garcia, “Comprehensive Evaluation of Hybrid Energy Storage Systems in Electric Vehicle”, 2015 IEEE Transportation Electrification Conference and Expo (ITEC), Dearborn, MI, June 14-17, 2015.

  8. A. Pozo Arribas, M. Krishnamurthy and K. Shenai, “Accurate Estimation of Switching Losses in SiC Power MOSFETs,” 2014 ECS and SMEQ Joint International Meeting, Oct. 5-9, Cancun, Mexico.

  9. L. Guo, A. Pozo Arribas, M. Krishnamurthy, K. Shenai and J. Wang, “Digital Control of DC-DC Converters Employing Wide Band Gap (WBG) Power Devices,” 2014 ECS and SMEQ Joint International Meeting, Oct. 5-9, Cancun, Mexico.

  10. Z. Yang, M. Krishnamurthy, “Vibration monitoring of PM synchronous machine with partial demagnetization and inter-turn short circuit faults by using both mode shape and vibration frequency”, 2014 IEEE Transportation Electrification Conference and Expo (ITEC), Dearborn, MI, June 15-18, 2014.

  11. W. Tian, Y. Jiang, M. Shahidehpour, M. Krishnamurthy, “A Comprehensive Evaluation of Wide Band Gap Semiconductor Devices in Traction Inverters”, 2014 IEEE Transportation Electrification Conference and Expo (ITEC), Dearborn, MI, June 15-18, 2014.

  12. F. Shang, M. Krishnamurthy, “A Comprehensive Evaluation of Wide Band Gap Semiconductor Devices in Traction Inverters”, 2014 IEEE Transportation Electrification Conference and Expo (ITEC), Dearborn, MI, June 15-18, 2014.

  13. R. C. Ramachandran, H. Patel, Y. Jiang, X. Shi, M. Krishnamurthy, G. Raman, “Noise Source Localization On A 8kW Wind Turbine Using A Compact Microphone Array With Advanced Beamforming Algorithms,” 5th International Meeting on Wind Turbine Noise, Denver, 28 – 30 August, 2013.

  14. Z. Yang, J. Garcia, M. Krishnamurthy, “Modeling and Control of a Continuously Variable Planetary Transmission for a Small Wind Turbine Drivetrain,” ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, UT, Sep 16-18, 2013.

  15. Z. Yang, M. Krishnamurthy, “Electromagnetic and Vibrational Characteristic of IPM over Full Torque-Speed Range,” 2013 IEEE International Electric Machines and Drives Conference, Chicago, IL, May 9-11, 2013.

  16. Y. Jiang, M. Krishnamurthy, “Optimal Design Considerations for Interior Permanent Magnet Motor for a Range-Extended Electric Vehicle,” 2013 IEEE Transportation Electrification Conference and Expo (ITEC), Dearborn, MI, June 18-20, 2013.

  17. J. Liu, S. Li, Y. Jiang, M. Krishnamurthy, “Reliability evaluating for traction drive system of high-speed electrical multiple units”, 2013 IEEE Transportation Electrification Conference and Expo (ITEC), Dearborn, MI, June 18-20, 2013.

  18. M. Bloom, M. Krishnamurthy, “Design Considerations for Wireless Electric Vehicle Charging,” 2013 IEEE Transportation Electrification Conference and Expo (ITEC), Dearborn, MI, June 18-20, 2013.

  19. Y. Sun, J. Garcia, M. Krishnamurthy, “A Novel Fixed Displacement Hydraulic-Electric Drivetrain for City Vehicles,” 2013 IEEE Transportation Electrification Conference and Expo (ITEC), Dearborn, MI, June 18-20, 2013, pp. 1-6.

  20. B. Bilgin, A. Emadi, M. Krishnamurthy, “Switched Reluctance Generator with Higher Number of Rotor Poles than Stator Poles”, 2012 IEEE Transportation Electrification Conference and Expo (ITEC), Detroit, June 18-20, 2012, pp. 1-6.

  21. S. Dusmez, B. Bilgin, S. Bekiarov, A. Khaligh, M. Krishnamurthy, “A Simple Control Scheme for Active Power Filtering in Ultracapacitor Assisted Plug-in Hybrid Vehicles,” 2012 IEEE Transportation Electrification Conference and Expo (ITEC), Detroit, June 18-20, 2012, pp. 1-6.

  22. R. Hou, X. Shi, M. Krishnamurthy, “Design and Implementation of a Novel Power Assisted Drivetrain for a Wheelchair,” 2012 IEEE Transportation Electrification Conference and Expo (ITEC), Detroit, June 18-20, 2012.

  23. Y. Jiang, M. Krishnamurthy, “Performance Evaluation of AC Machines for Propulsion in a Range Extended Electric Auto Rickshaw,” 2012 IEEE Transportation Electrification Conference and Expo (ITEC), Detroit, June 18-20, 2012, pp. 1-6.

  24. Y. Da, M. Krishnamurthy, “Position and Current Estimation for Permanent Magnet Synchronous Machines Using Search Coils,” 2011 IEEE Vehicle Power and Propulsion Conference (VPPC), Chicago, Sep 6-9, 2011, pp. 1-5.

  25. A. Borsuk, B. Bilgin, A. Khaligh, M. Krishnamurthy, “An REU Project on the Design of a Brushless DC Machine for Plug-in Hybrid Electric Vehicles,” 2011 IEEE Vehicle Power and Propulsion Conference (VPPC), Chicago, Sep 6-9, 2011, pp. 1-6.

  26. Y. Da, X. Shi, M. Krishnamurthy, “Health Monitoring, Fault Diagnosis and Failure Prognosis Techniques for Brushless Permanent Magnet Machines,” 2011 IEEE Vehicle Power and Propulsion Conference (VPPC), Chicago, Sep 6-9, 2011, pp. 1-7.

  27. B. Bilgin, M. Krishnamurthy, “An FEA/MatLab based Machine Design Tool for Switched Reluctance Motors,” 2011 IEEE Vehicle Power and Propulsion Conference (VPPC), Chicago, Sep 6-9, 2011, pp. 1-6.

  28. S. Dusmez, A. Khaligh, M. Krishnamurthy, E. Ugur, M. Uzunoglu, “Sensorless Control of BLDCs for All Speed Ranges with Minimal Components,” 2011 IEEE Aegean Conference on Electric Machines and Power Electronics (ACEMP), Istanbul, Turkey, Sep 8-10, 2011, pp. 626 – 631.

  29. X Shi, M. Krishnamurthy, “Concept and Implementation of a Simplified Speed Control Strategy for Survivable Induction Motor Drives,” 2011 IEEE International Symposium on Industrial Electronics Conference (ISIE), Gdansk, Poland, June 26 – 30, 2011, pp. 556 – 561.

  30. B. Bilgin, A. Emadi, M. Krishnamurthy, “Comparative evaluation of 6/8 and 6/10 switched reluctance machines for Traction Application in Plug-in Hybrid Electric Vehicles,” 2011 IEEE International Electric Machines and Drives Conference, Niagara Falls, Canada, May 15 – 18, 2011, pp. 1300 – 1305.

  31. Y. Jiang, M. Krishnamurthy, “Electromagnetic Assessment of Force Distribution for Common Control Strategies in Permanent Magnet Synchronous Motors,” 2011 IEEE International Electric Machines and Drives Conference, Niagara Falls, Canada, May 15 – 18, 2011, pp. 254 – 259.

  32. X Shi, M. Krishnamurthy, “A Simplified State Switching Control Strategy for Survivable Variable-Speed Induction Generators,” 2011 IEEE International Electric Machines and Drives Conference, Niagara Falls, Canada, May 15 – 18, 2011, pp. 182 – 187.

  33. G. Raman, M. Krishnamurthy, R. C. Ramachandran, C. Pereira, X. Shi, Y. Jiang, M. Price, and M. Arnold, “Test Bed for Acoustic Assessment of Small Wind Turbine Drive-Trains,” Fourth International Meeting on Wind Turbine Noise, Rome Italy, April 12-14, 2011.

  34. B. Bilgin, E. Dal Santo, M. Krishnamurthy, “Universal Battery Charger using a Simplified Control Strategy,” 2011 IEEE Applied Power Electronics Conference, Ft. Worth, Texas, pp. 815 – 820.

  35. X. Shi, J. Piniero, M. Krishnamurthy, “Back EMF-based Rotor Position Prediction in Permanent Magnet Machines for Survivable Wind Generator Systems,” 2010 IEEE Industrial Electronics Conference, Phoenix, AZ, November 7-10, pp. 778 – 783.

  36. Y. Da, M. Krishnamurthy, “Novel Fault Diagnostic Technique for Permanent Magnet Synchronous Machines Using Electromagnetic Signature Analysis,” 2010 IEEE Vehicle Power and Propulsion Conference, Paris, France, Sep 1-3, pp. 1 – 6.

  37. B. Bilgin, A. Emadi, M. Krishnamurthy, “Design Considerations for Switched Reluctance Machines with Higher Number of Rotor Poles for Solar-Assisted Plug-In Electric Auto Rickshaw,” 2010 IEEE International Symposium on Industrial Electronics Conference (ISIE), Bari, Italy, Jul 4-7, 2010, pp. 1247 – 1252.

  38. B. Bilgin, A. Emadi, M. Krishnamurthy, “Design Considerations for a Universal Input Battery Charger Circuit for PHEV Applications,” 2010 IEEE International Symposium on Industrial Electronics (ISIE) Conference, Bari, Italy, Jul 4-7, 2010, pp. 3407 – 3412.

  39. N. Milivojevic, I. Stamenkovic, M. Krishnamurthy, A. Emadi, “A digital control strategy for brushless DC generators,” 2010 IEEE Applied Power Electronics Conference and Exposition (APEC), Palm Springs, CA, Feb 21- 25, pp. 1957 – 1962.

  40. P. C. Desai, M. Krishnamurthy, N. Schofield, A. Emadi, “Switched Reluctance Machine with Higher Number of Rotor Poles for High Volume Low Cost Manufacturing,” 2009 IEEE Industrial Electronics Conference, Porto, Portugal, Nov 2-5, pp. 1332 - 1337.

  41. P. C. Desai, M. Krishnamurthy, N. Schofield, A. Emadi, “Switched Reluctance Machines with Higher Rotor Poles than Stator Poles for Improved Output Torque Characteristics,” 2009 IEEE Industrial Electronics Conference, Porto, Portugal, Nov 2-5, pp. 1338 - 1343.

  42. I. Stamenkovic, N. Milivojevic, M. Krishnamurthy, N. Schofield, A. Emadi, “Ironless Machine Design and Novel Digital Control for Automotive Application,” 2009 IEEE Vehicle Power and Propulsion Conference, Dearborn, MI, Sep 7-11, pp. 475 - 480.

  43. F. Fleming, O. Vodyakho, C. S. Edrington, M. Steurer, S. Azongha, M. Krishnamurthy, “Influence of DC-Link Fluctuations on Three- Phase Induction Motor Drives,” 2009 IEEE Vehicle Power and Propulsion Conference, Dearborn, MI, Sep 7-11, pp. 748 - 753.

  44. C. S. Edrington, O. Vodyakho, M. Steurer, S. Azongha, F. Fleming, M. Krishnamurthy, “Power Semiconductor Loss Evaluation in Voltage Source IGBT Converters for Three-Phase Induction Motor Drives,” 2009 IEEE Vehicle Power and Propulsion Conference, Dearborn, MI, Sep 7-11, pp. 1434 - 1439.

  45. P. C. Desai, M. Krishnamurthy, N. Schofield, A. Emadi, “Design and Performance Evaluation of a novel 6/10 Switched Reluctance Machine,” 2009 IEEE International Electric Machines and Drives Conference, Miami, FL, 3-6 May, pp. 755 - 762.

  46. A. Sathyan, M. Krishnamurthy, N. Milivojevic, A. Emadi, “A low cost digital control scheme for brushless DC motor drives in domestic applications,” 2009 IEEE International Electric Machines and Drives Conference, Miami, FL, 3-6 May, pp. 76 - 82.

  47. M. Krishnamurthy, B. Fahimi, “Qualitative analysis of force distribution in a 3-phase permanent magnet synchronous machine,” 2009 IEEE International Electric Machines and Drives Conference, Miami, FL, 3-6 May, pp. 1105 - 1112.

  48. A. Khoobroo, M. Krishnamurthy, B. Fahimi, W-J. Lee, “Effects of System Harmonics and Unbalanced Voltages on Electromagnetic Performance of Induction Motors,” 2008 IEEE Industrial Electronics Conference (IECON), Orlando, FL, Nov 10-13, pp. 1173 - 1178.

  49. M. Krishnamurthy, B. Fahimi, “Magnetic field reconstruction in electric machines: A novel approach towards modeling of electric motor drives,” (Invited paper) 2007 Summersim conference, San Diego, CA, July 15-18.

  50. H. Yu, R. Jayabalan, M. Krishnamurthy, B. Fahimi, “Analysis of High Speed Characteristics for Linear Induction Machines,” 2006 IEEE Vehicle Power and Propulsion Conference, September 6-8, Windsor, England, pp. 1 - 6.

  51. M. Krishnamurthy, B. Fahimi, “Investigation of Energy Conversion in a Squirrel-Cage Induction Motor Drive under Field-Oriented Control,” 2006 IEEE International Conference on Electrical Machines (ICEM), September 2-5, Crete Island, Greece.

  52. M. Krishnamurthy, B. Fahimi, K. D. Oglesby, “Comparative Evaluation of Axial Flux versus Radial Flux Permanent Magnet Synchronous Machines,” 2006 IEEE International Conference on Electrical Machines (ICEM), September 2-5, Crete Island, Greece.

  53. M. Krishnamurthy, N. Chaddha, B. Fahimi, “Sensorless estimation of airgap in a Magnetically Levitated (MagLev) System,” 2006 IEEE International Symposium on Industrial Electronics (ISIE), Montréal, Canada, Volume 3, 9-13 July, pp. 2566 - 2570.

  54. M. Krishnamurthy, B. Fahimi, C. S. Edrington, “On the Measurement of Mutual Inductance of a Switched Reluctance Machine,” 2006 IEEE Power Electronics Specialists Conference (PESC), June 18-22, Jeju, Korea, pp. 1 - 7.

  55. S. Wang, M. Krishnamurthy, R. Jayabalan, B. Fahimi, “Quasi-Resonant DC/DC Converter for High Power Fuel Cells Systems,” 2006 IEEE Power Electronics Specialists Conference (PESC), June 18-22, Jeju, Korea, pp.1 - 7.

  56. A. Jindal, M. Krishnamurthy, B. Fahimi, “Modeling and analysis of a micro-variable capacitance electromechanical energy converter,” 2006 IEEE International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), May 23-26, Taormina (Sicily), Italy, pp. 358 - 363.

  57. M. Krishnamurthy, B. Fahimi, S. D. Pekarek, “Microscopic Analysis of Energy Conversion in a 5-Phase Permanent Magnet Synchronous Machine,” 2006 IEEE Conference on Electromagnetic Field Computation (CEFC), Apr 30- May 3, Miami, Florida, pp. 483 - 483.

  58. S. Wang, M. Krishnamurthy, R. Jayabalan, B. Fahimi, “Low-cost quasi-resonant DC-DC converter for fuel cells with enhanced efficiency,” 2006 IEEE Applied Power Electronics Conference, March 19-23, Dallas, Texas, pp. 1280 - 1285.

  59. C. S. Edrington, M. Krishnamurthy, B. Fahimi, “Enhancement of torque pulsation and acoustic response in SRM drives via bipolar excitation,” 2005 SAE (Society of Automotive Engineers) –Future Transportation Technology (FTT) Conference, September 7-9, Chicago, Illinois.

  60. M. Krishnamurthy, C. S. Edrington, B. Fahimi, “Comparison of various converter topologies for bipolar switched reluctance motor drives,” 2005 IEEE Power Electronics Specialists Conference (PESC), June 12-16, Recife, Brazil, pp. 1858 - 1864.

  61. M. Krishnamurthy, A. Jindal, B. Fahimi, “Operational characteristics of micro Variable Capacitance Motor Drives: A preliminary study,” (Invited paper) 2005 IEEE International Electric Machines & Drives Conference (IEMDC), May 15- 18, pp. 1116 - 1121.

  62. M. Krishnamurthy, D. C. Kaluvagunta, B. Fahimi, “Effects of High Frequency Excitation on the Behavior of a Switched Reluctance Machine,” 2005 IEEE 2005 International Electric Machines & Drives Conference (IEMDC), May 15- 18, San Antonio, Texas, pp. 186 - 192.

  63. M. Krishnamurthy, C. S. Edrington, B. Fahimi, “Prediction of Rotor Position at Standstill and Flying Shaft Conditions in Switched Reluctance Machines,” 2004 IEEE Applied Power Electronics Conference (APEC), February 21 - 26, Anaheim, California, Vol. 1, pp. 537 - 544.