Recent Journal Publications


  1. F. Shang, G. Niu, M. Krishnamurthy*, “Design and Analysis of a High Voltage-Gain Resonant DC-DC Converter”, accepted for publication to IEEE Transactions on Transportation Electrification.

  2. G. Niu, F. Shang, M. Krishnamurthy, J. Garcia, “Design and Analysis of an Electric Hydraulic Hybrid Powertrain in Electric Vehicles”, accepted for publication to IEEE Transactions on Transportation Electrification.

  3. Z. Yang, F. Shang, M. Krishnamurthy, “Comprehensive Comparison of Interior Permanent Magnet, Induction and Switched Reluctance Motor Drives for EV and HEV Application,” IEEE Transactions on Transportation Electrification. Volume: 1, Issue 3, Publication Year: 2015, pp. 245–254.

  4. A. Pozo Arribas, F. Shang, M. Krishnamurthy, K. Shenai, “Simple and Accurate Circuit Simulation Model for SiC Power MOSFETs,” IEEE Transactions on Electron Devices, Volume: 62, Issue: 2, Publication Year: 2015, pp. 449 - 457.

  5. Y. Jiang, J. Liu, W. Tian, M. Shahidehpour, M. Krishnamurthy, “Energy Harvesting for the Electrification of Railway Stations: Getting a charge from the regenerative braking of trains”, IEEE Electrification Magazine, Volume: 2, Issue: 3, Publication Year: 2014, pp. 39 - 48.

  6. X. Shi, M. Krishnamurthy, “Digital Control of Induction Machine as a Backup Control Strategy for Fault Tolerant Operation of Traction Motors,” IEEE Journal of Emerging and Selected Topics in Power Electronics, Volume: 2, Issue: 3, Publication Year: 2014, pp. 651 - 658.

  7. X. Shi, M. Krishnamurthy, “Survivable Operation of Induction Machine Drives with Smooth Transition Strategy for EV Applications,” IEEE Journal of Emerging and Selected Topics in Power Electronics, Volume: 2, Issue: 3, Publication Year: 2014, pp. 609-617.

  8. A. Mohammadi, P. Massonnat, A. Djerdir, F. Gao, D. Bouquain, D. Khaburi, M. Krishnamurthy, “Fault Analysis of the PEMFC by using 3D Sensitive Model Based on Operating Conditions for Automotive Applications”, International Journal on Energy Conversion, Vol. 2, No. 5, 2014

  9. R. C. Ramachandran, H. Patel, Y. Jiang, M. Krishnamurthy, G. Raman,“ Noise Source Localization On a Small Scale Wind Turbine Using a Compact Microphone Array with Advanced Beamforming Algorithms: Part I – A Study of Aerodynamic Noise from Blades,” Journal of Wind Engineering, Vol. 38 Issue 1, p73, 2014..

  10. H. Patel, R. C. Ramachandran, Y. Jiang, M. Krishnamurthy, G. Raman,“ Noise Source Localization on a Small Scale Wind Turbine Using a Compact Microphone Array with Advanced Beamforming Algorithms: Part II – A Study of Mechanical Noise from Nacelle Using a Wind Turbine Drive Train Simulator,” Journal of Wind Engineering, Vol. 38 Issue 1, p89, 2014.

  11. Y. Da, X. Shi, M. Krishnamurthy, “A Novel Universal Sensor Concept for Survivable PMSM Drives,” IEEE Transactions on Power Electronics, Volume: 28, Issue: 8,Publication Year: 2013, pp. 5630 - 5638

  12. Y. Da, X. Shi, M. Krishnamurthy, “A New Approach to Fault Diagnostics for Permanent Magnet Synchronous Machines Using Electromagnetic Signature Analysis,” IEEE Transactions on Power Electronics, Volume: 28, Issue: 8, Publication Year: 2013, pp. 4104 - 4112

  13. I. Stamenkovic, N. Milivojevic, N. Schofield, M. Krishnamurthy, A. Emadi, “Design, Analysis and Optimization of Ironless Stator Permanent Magnet Machines,” IEEE Transactions on Power Electronics, Volume: 28, Issue: 5, Publication Year: 2013, pp. 2527 - 2538

  14. B. Bilgin, A. Emadi, M. Krishnamurthy, “Comprehensive Evaluation of the Dynamic Performance of a 6/10 SRM for Traction Application in PHEVs,” IEEE Transactions on Industrial Electronics, Volume: 60, Issue: 7, Publication Year: 2013, pp. 2764 – 2575.

  15. N. Milivojevic, Y. Gurkaynak, A. Sathyan, Y. J. Lee, M. Krishnamurthy, A. Emadi, “Stability Analysis of Digital PWM control for brush-less DC motors in motoring and generating modes,” IEEE Transactions on Industrial Electronics, Volume: 59, Issue: 1, Publication Year: 2012, pp. 343 - 351.

  16. B. Bilgin, A. Emadi, M. Krishnamurthy, “Design Considerations for Switched Reluctance Machines with Higher Number of Rotor Poles,” IEEE Transactions on Industrial Electronics, Volume: 59, Issue: 10, Publication Year: 2012, pp. 3745 – 3756.

  17. C. S. Edrington, O. Vodyakho, F. Fleming, S. Azongha, M. Krishnamurthy, “Evaluation of voltage source IGBT converters for three-phase induction motor drives,” International Journal of Power Electronics, Vol. 3, No. 6, 2011.

  18. N. Milivojevic, M. Krishnamurthy, A. Emadi, I. Stamenkovic, “Theory and Implementation of a Simple Digital Control Strategy for Brushless DC Generators,” IEEE Transactions on Power Electronics, Volume: 26, Issue: 11, Publication Year: 2011, pp. 3345 – 3356

  19. P. C. Desai, M. Krishnamurthy, N. Schofield, A. Emadi, “Novel Switched Reluctance Machine Configuration with Higher Number of Rotor Poles than Stator Poles: Concept to Implementation,” IEEE Transactions on Industrial Electronics, Volume 57, Issue 2, Feb. 2010, pp. 649 - 659.

  20. A. Sathyan, N. Milivojevic, Y. J. Lee, M. Krishnamurthy, A. Emadi, “An FPGA based novel digital PWM control for a brush-less DC motor drive,” IEEE Transactions on Industrial Electronics, Volume 56, Issue 8, Aug. 2009 pp. 3040 - 3049.

  21. C. S. Edrington, B. Fahimi, M. Krishnamurthy, “An Autocalibrating Inductance Model for Switched Reluctance Motor Drives,” IEEE Transactions on Industrial Electronics, Volume 54, Issue 4, Aug. 2007 pp. 2165 - 2173.

  22. M. Krishnamurthy, C. S. Edrington, A. Emadi, B. Fahimi, “Making the Case for Applications of Switched Reluctance Motor Technology in Automotive Products,” IEEE Transactions on Power Electronics, Vol. 21, Issue 3, May 2006, pp. 659 - 675.

  23. M. Krishnamurthy, C. S. Edrington, B. Fahimi, “Prediction of Rotor Position at Standstill and Rotating Shaft Conditions in Switched Reluctance Machines,” IEEE Transactions on Power Electronics, Vol. 21, Issue 1, Jan. 2006, pp.225 - 233.

  24. C. S. Edrington, M. Krishnamurthy, B. Fahimi, “Bipolar switched reluctance machines: A novel solution for automotive applications,” IEEE Transactions on Vehicular Technology, Vol. 54, Issue 3, May 2005, pp. 795 - 808.